Work protection for man and machine with the HoseGuard® hose rupture safeguard
The HoseGuard® hose rupture protection protects man and machine from the dangerous whipping of a damaged or burst compressed air hose. The increased flow differential triggers the hose rupture protection, and the flow of the supply line is immediately reduced if a hose rupture occurs. The HoseGuard® is equipped with a reset function that allows a minimum flow once the HoseGuard® has been activated.
If the air consumption exceeds the set value because the air line has been cut, the internal piston immediately shuts off the main flow. An integrated vent hole allows some air to flow through. This allows the line pressure to automatically reset the HoseGuard once the main break has been repaired.
The HoseGuard® hose rupture protection complies with the high demands of various standards such as
- EN ISO 4414/ISO 4414 § 5.4.5.11.1 Machinery Directive 2006/42/EC,
- OSHA USA: 1926 Occupational Safety & Health Regulations Administration Power Operated Hand Tools - 1926.302/b.7 OSHA Regulations (Standards - 29 CFR)
- OHSAS 18001 (to be replaced by ISO 45001) Occupational Health and Safety Standard
Cost-effectively and easily ensure compliance with international guidelines for effects of hose rupture. Use this easy-to-maintain safety component in your application, which is compatible with all pneumatic systems.
FAQs
People are protected from the dangerous whipping of a damaged or burst compressed air hose with the HoseGuard® hose rupture protection. As soon as a hose breaks off or is otherwise damaged, the hose rupture protection prevents the compressed air from escaping.
The HoseGuard® hose rupture protection protects man and machine from the dangerous whipping of a damaged or burst compressed air hose. Due to the flow difference in the event of a hose rupture, a closing cone shuts off the gas supply and the flow of the supply line is immediately reduced. The HoseGuard® hose rupture protection is equipped with a reset function which allows a minimum flow after activation.
The HoseGuard® hose rupture protection complies with the high demands of various standards and is fitted between the pressure regulator and the hose line.
Contact us for expert advice: By phone on +41 (0)41 780 22 22 or by e-mail to info@tri-matic.ch.
Protect-Air® from TRI-MATIC
Quality that has it all