A robust pneumatic control plate for spraying concrete or mortar is manufactured to prevent incorrect manipulation and increase reliability.

Offer request  Contact us

Pneumatic assembly control plate

A robust pneumatic control plate for spraying concrete or mortar is manufactured to prevent incorrect manipulation and increase reliability.

Offer request  Contact us

Challenge

A simple and robust pneumatic control system was required for a system for spraying concrete or mortar. Concrete or mortar is pneumatically conveyed from the mixing plant to the installation site and applied. The aim was to centrally control the individual components and functions distributed in the plant. Faulty manipulations are to be prevented, reliability increased and susceptibility to damage eliminated.

Application

The concrete or mortar must be sprayed in the desired quantity and quality at all times. During the spraying process, the control pressure is quickly and easily adjusted according to requirements. The system is quickly vented so that the desired medium can be safely replaced or refilled.

Solution

The pneumatic control system was rebuilt, centralised and all components were installed on a base plate with impact protection. In addition to the air maintenance unit, TRI-MATIC Engineering also redesigned the control valves and pneumatic ball valves with reserve capacity to ensure the required performance at all times. The control plate can be easily installed in the system with four screws and is easily accessible and centrally wired.

Other assemblies

Quality that's got it all

Assembly distribution board

A machine tool manufacturer wants to save assembly time internally and has the distribution board assembly manufactured by TRI-MATIC.

Assembly distributor

The procurement of the distributor for a coating system now only needs one supplier instead of five.

Assembly door operator

Pneumatic door drives open and close the doors of a paint booth automatically, continuously, smoothly and synchronously.

Assembly fixed water connection for a drinking water dispenser

A drinking water dispenser needs a non-adjustable pressure control to prolong the life of the unit.

Assembly fixed water connection for a water tank

For level control of a water tank, a fixed water connection is mounted in limited space.

Assembly hydraulic control panel

With only 1 instead of 13 suppliers, a manufacturer of packaging machines wants to reduce the effort for the procurement and assembly of a sub-assembly.

Assembly hydraulic manifold block

The hydraulic manifold block distributes the cutting oil to the various tools of the lathe.

Assembly pneumatic ATEX control box

Fully ATEX certified, validated and ready for use, a pneumatic control box is supplied for a liquid sampling system.

Assembly pneumatic switch and control cabinet

For limited space in a milling machine, a purely pneumatic control cabinet and a separate operating control panel were developed.

Assembly water collector

To save time internally during assembly, a manufacturer of packaging machines has a water collector manufactured externally by TRI-MATIC.

Pneumatic assembly control plate

A robust pneumatic control plate for spraying concrete or mortar is manufactured to prevent incorrect manipulation and increase reliability.

Pneumatic assembly with Tri-Airvalve Compact

A supplier of heat exchangers wants to easily and smoothly procure a complex, heat-resistant assembly with a 2/2-way ball valve for a steam air heater.

Pneumatic timer assembly

TRI-MATIC takes over the work preparation for short for a production order from a manufacturer of machine tools.